SYSTEM SETUP
Scan Type: This setting allows you to select betweenDue to the nature of these settings, the navigation is
progressive and interlaced scanning for thesomewhat different from the DVD 22Os other menus
Component Video Outputs to maximize theand controls. The menu itself is called up in the same
image resolution for the type of video display in use.way as the other menus. Press the OSD Button `
When all desired setup and configuration entries haveto activate the main menu screen, and then press the
been made, press the OSD Button ` to return the?¤Navigation Buttonseso that SETUP
player to normal operation and you are ready to enjoyis highlighted. Press the Enter Button z, and then
the finest in DVD or CD playback! Note that the outputuse the ?¤?? Navigation Buttons e until
at the S-Video and Composite Video §the VIDEO ADJUSTMENTS menu box
outputs will always be standard-rate video that is (which contains an icon with slider controls and the
compatible with any television set or video display.word VIDEO, and is located at the bottom of the
Two choices are available:column in the Submenus Area +) is highlighted
Y Progressive: Select this option if you have a videowithin a white outline. Then press the Enter Button
display that is compatible with input sources ofz again.
480P or greater. Displays labeled as OHDTV Ready,�When you press Enter z the video adjustments will
including virtually all large-screen LCD and plasmaappear inside a black bar at the top of the screen,
displays, are compatible with progressive scan.with either the video from a disc being played or the
splash screen shown on the rest of the screen.
Y Interlaced: Select this option when you are using
an older video display that has Y/Pr/Pb component
inputs, but which is not capable of displaying high
scan rate, or OHD� signals.
Video Mode: This setting affects only the Com-
ponent Video Outputs , and it controls how the
video signals are optimized for progressive scan dis-
play. In most cases, the Oautomatic� mode is your best
choice, as it senses whether the disc being played was
originally recorded on video or shot on film. However,
in some cases you may wish to compensate for errors
in the disc authoring that occur when the frame rate is
not properly maintained when films are converted toTo change any of the video adjustments shown at
video. Three choices are available:the top of the screen, first press the ?¤??
Y Auto: This is the recommended setting, as it lets theNavigation Buttons e so that the O+� to the right
DVD 22 analyze the signals from the DVD andof a parameter name is highlighted to increase the
adjust the output accordingly.setting or O�� to the right of a parameter name is high-
lighted to decrease the setting. Then press the Enter
Y Movie: Choose this option for optimal playback ofButton z to change the value as shown by the
material that was shot on film, even though you arenumber of blue lines to the left or right of the center
viewing it on video via a DVD.
Y Video: Choose this option for optimal playback ofline. When only the dark center line is shown with no
material that was shot directly to video, such asblue lines, the setting is at the midpoint default value.
concerts and sports programming.Changes to any of the settings may be made with a
test disc playing, or you may use the internal test sig-
Video Adjustments Menunal by pressing the ?¤?? Navigation Buttons
This menu allows you to adjust five key parameters e until the word OFF is highlighted next to the
of the video signal to compensate for differencesTEST SCREEN line. To activate the test signal,
between your DVD player and other video sources.press the Enter Button z and note that a special
You may use either the DVD 22Os built-in color bar testcombination test signal, including both color bars and
signal or a test disc as the standard for the adjust-gray scale along with 100% black and white fields, will
ments. To ensure that your system is properly opti-be displayed. To recall the video controls, press the
mized, we strongly recommend that you adjust yourOSD Button ` and then navigate among the set-
video display using the displayOs own controls beforetings and make any necessary changes following the
making any changes to the DVD 22Os output. Oncesteps in the previous paragraph.
the display is properly calibrated with all settings on
the DVD 22 set to their midpoint, use the controls on
this menu to fine-tune the DVD 22Os output.
20 SYSTEM SETUP |
ACEC
